Cold Shrink Tube for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables

Factory direct Cold Shrink Tubes for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables. High quality insulation for reliable connections.
Request a Quote

PRODUCTS DETAILS

Basic Info.

Model NO.
CST-LMR
Trademark
HarshSeal
Origin
China
HS Code
8547200000
Production Capacity
500000 Pieces / Month

Product Description

Cold Shrink Coax Connector Sealing Kits CST12 Series
Cold Shrink Tube for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables
Description

CST12 series provide the correct Cold Shrink tubing or the correct Cold Shrink tubing and special foam to make the installation of coax connector seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
Applications
The main application is the sealing of coax connectors used in the wireless communication antenna market. These mainly outside installed connectors require an extra sealing. 
Cold Shrink Tube for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables 
Technical Information

The outer Cold Shrink tubing is made from UV resistant EPDM or Silicone rubber material to provide an excellent seal on the connector. In cases where the different coax cable diameter can not be covered with the tube application range, a special foam is used to increase the smallest cable diameter to fit the shrink performance of the Cold Shrink tube.
Cold Shrink Tube for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables
Selection Table

 
Part# Supported Coax Sizes Material Application Range Connectors Type
CST12D   1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable Connections Silicone Rubber / EPDM Rubber       13 - 39
 
7/16 DIN, N type & Mini Din 4.3-10 & 4.1-9.5
CST12MD 1/2" Jumper Cable to Antenna Connections, 1/2" Cable to 1/2" Cable Connection Silicone Rubber/ EPDM Rubber        13 - 27 Mini Din 4.3-10 & 4.1-9.5
CST1278MN ½" Jumper Cable to 7/8" Feeder Cable Connection,
5/8"Cable  to 7/8" Cable Connections

 
EPDM Rubber        13 - 49    7/16 DIN & N Type
CST12158MN 1/2" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections
5/8" Jumper Cable to 1-1/4" or 1-5/8" Feeder Cable Connections
EPDM Rubber        13 - 67.8 7/16 DIN & N Type
 
Note: For any other cable or connector applications, please contact us for new product spec ification and solutions


Typical Properties(Mechanical & Electrical)
EPDM Rubber
Properties Typical Data Test Method
300% Modulus 4.7Mpa  ASTM D 412-75
Ultimate Tensile Strength 11.8 MPa ASTM D 412-75
Utimate Elongation 750% ASTM D 412-75
Tear Strength 38.6N/mm ASTM D624C-73
Dielectric Strength 19.1KV/mm ASTM D149-75
Moisture Absorption Weight gain 1.8% 7 days, 90°C, HO
UV Resistance 2,000hrs, UVB-313 fluorescent lamp, exposure ASTM G-53
 
Typical Properties(Mechanical & Electrical)  
Silicone Rubber

 
Properties Typical Data Test Method
Hardness 49 Shore A ASTM D2240
Tensile Strength 11.8 MPa ASTM D 412-75
Elongation at Break 641% ASTM D 412-75
Tear Strength 38.6N/mm ASTM D624B
Dielectric Strength 19.1KV/mm ASTM D149
Specific Gravity 1.23 /
Cold Shrink Tube for LMR-240, LMR-400, LMR-600, LMR-900, LMR -1200 Coax Cables

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours